Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

2016 - Blocking for diaphragm load transfer [ SBCA magazine ] [ Simpson StrongTie Blog]

Design Resources

2016 - Blocking for diaphragm load transfer [ SBCA magazine ] [ Simpson StrongTie Blog]

by  lexpatrie  Posted    (Edited  )
Heel Blocking Requirements and Capacity Analysis, Research report 1506-07, Feb 2016.

Rock the Block, Kutschenreuter, Structural Building Components magazine, June/July 2018.

Courtesy of StrEng007 - an added reference
Why a Structural Boundary Member Between a Truss/Rafter is Not Optional, Paul Entegee, Simpson StrongTie Structural Engineering blog, date currently unclear

ETA: FAQ title incorrectly had Structure Magazine and Woodworks listed. 11/9/24
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom