Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What's the best way to prevent walls of UGWT from leakage ?

UGWT Wall

What's the best way to prevent walls of UGWT from leakage ?

by  pmcsl  Posted    (Edited  )
1. You can use Water stopper where there is a cold-joint,
2. you can use Puddlo as an adhessive in th concrete.
3. Use rich mortar.
4. If you are not using Water-Stopper then make sure a key
or groove to prevent leakage.


Muhammad Nasir(NED)
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom