Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

2003 - 2004 Basic Design for Stability (lecture series)

Technical Background

2003 - 2004 Basic Design for Stability (lecture series)

by  lexpatrie  Posted    (Edited  )
Basic Design for Stability, a joint presentation of AISC and the SSRC had four lectures developed by Galambos, Yura, Helwig, and Green. (Perry Green joined the Steel Joist Institute for awhile).

There were four lectures, all offered on the same day as I recall.

Lecture 1 - Introduction to Stability
Lecture 2 - Column Stability
Lecture 3 - Frame Stability- Alignment Charts and Modifications
Lecture 4 - Frame Stability - P-D method and FAQ. (Large Delta).

I've found one on the AISC website, link currently working as of 5/9/2024. Please use feedback if the link stops working.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom