Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

2007 - Design Tips for Steel in Low or Moderate Seismicity Regions

Technical Background

2007 - Design Tips for Steel in Low or Moderate Seismicity Regions

by  lexpatrie  Posted    (Edited  )
Steel Interchange, November 2007, Modern Steel Construction

Design Tips for Steel in Low or Moderate Seismicity Regions, Kelly, Zona, February 2006, Modern Steel Construction

Steel Interchange, February 2018, Modern Steel Construction.

There were a lot of articles earlier on the same subject, probably starting around 2000. I haven't tracked them down, but if you find any you think are particularly worth including here, please comment on this FAQ and I will try to update.

It's been discussed previously on this forum, as well. https://www.eng-tips.com/viewthread.cfm?qid=244015.
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search