Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

2009 - (2005 Appendix 7 ) Direct Analysis and Notional loads

Technical Background

2009 - (2005 Appendix 7 ) Direct Analysis and Notional loads

by  lexpatrie  Posted    (Edited  )
Just getting a start on this one, so it's going to be a bit threadbare for a while.

Note this is in Appendix 7 as of the 2005 AISC Specification.

Simple and Direct, Nair, Modern Steel Construction, Jan 2009

A Model Specification for Stability Design by Direct Analysis, Nair, AISC Engineering Journal, 1st Quarter, 2009 (as of 6/6/2024 this is a free download)

Software and the Direct Analysis Method, Gebremeskel, Modern Steel Construction, December 2009

A How-to Approach to Notional Loads, Ericksen, Modern Steel Construction, January 2011.

Feel free to use the feedback option if there's anything you'd suggest be added.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom