Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

2006 - Bracing of Beams, Trusses, and Joist Girders Using Open Web Steel Joists

Open Web Steel Joists

2006 - Bracing of Beams, Trusses, and Joist Girders Using Open Web Steel Joists

by  lexpatrie  Posted    (Edited  )
This is tough to categorize, it's using open web steel joists to brace beams and trusses. (Trusses and beams fall under AISC codes, steel joists do not). As this paper is currently hosted on the Steel Joist Institute web site, I'm going to categorize it under joists.

Anyway, here's the link.
Bracing of Beams, Trusses, and Joist Girders Using Open Web Steel Joists, Fisher, AISC Engineering Journal, 1st Quarter, 2006.


Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom