Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

2006 - Specifying Camber

Design Resources

2006 - Specifying Camber

by  lexpatrie  Posted    (Edited  )
ETA: 11/10/2024
Historical items (referenced in Downey):

Ricker, Cambering Steel Beams, Ricker, 4th Quarter, 1989, Engineering Journal (PDF).

Kloiber, Cambering of Steel Beams, ASCE Structures Congress, 1989 (note this is just a "confirmation page" you probably can't get this article anymore and the CE database is being sunset, too.

Specifying Camber, Downey, July 2006, Modern Steel Construction.

More recently:
Lini, Does this Beam make my building look too heavy?, Modern Steel Construction, November 2012. (added 11/14/24) - discusses camber mostly on spandrel (slab edge) beams.

Kloiber and Burmeister, Cambering Considerations, Modern Steel Construction, November 2020.

And AISC Design Guide 36, Design Considerations for Camber, 2020.

These edits may make things a bit jumbled, but I'm trying to keep things in chronological order, partly. I'll probably move the Downey article down into technical background and replace it with Kloier and Burmeister as it's the most recent of the articles. But, as St. Augustine said, (sort of), "not yet."
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search