Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

why the cross-section of the steel bars in R.C.C are rounded

why the cross-section of the steel bars in R.C.C are rounded

by  231  Posted    (Edited  )
to have the loadiing transfer uniformly and to have a perfect bond between the steel and concrete
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom