Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is there any specification requiring or describing a pre/post vibe to verify structural integrity for a random vibe test flow?

Random Vibe qualification test

Is there any specification requiring or describing a pre/post vibe to verify structural integrity for a random vibe test flow?

by  Saltycuda  Posted    (Edited  )
The current draft of the aerospace test standard, (MIL-STD-1540E) released as TR-RS-2014-00016 also released as SMC-S-016(2014) states in section 6.3.5.3:
Low-level testing shall be performed in each axis before and after the specified vibration tests to detect any structural changes.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom