Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Threaded on an Endplate/Lid/Cover

ASME BPVC Section VIII Div 1

Threaded on an Endplate/Lid/Cover

by  Itai Zohar  Posted    (Edited  )
Hii All,

I would appreciate the help regarding the allowable threaded on an Endplate (AKA - Lid or Cover)
the threads are not threaded Thru all the flange thickness.
is this allowed by ASME BPVC Section VIII Div 1 and if so, what is the section related to it?

Thanks!
Itai
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom