Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unit Converters

Internet Resources

Unit Converters

by  mloew  Posted    (Edited  )
[li]www.onlineconversion.com[/li][li]www.joshmadison.com/software/convert[/li][li]www.coade.com/miscellaneous/uconvert.zip[/li][li]www.processassociates.com/process/convert/cf_all.htm[/li][li]www.netpanel.com/software/wincon.htm[/li][li]http://members.execulink.com/~pjones/
[/li]

Thanks to the following memebers for the links: cb68, gearguru, xhpipe, Shmulik, waskillywabbit, FredGarvin

Please also see The Metric Conversion Act of 1975 (www.usaid.gov/policy/ads/300/metricact.pdf) for information on the intended use of SI units in the US.

There are also pulications available from the NIST: Metric Information and Conversions. Thanks to member CoryPad for the link.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom