[ol][li]Have you checked the help files?[/li] [li]Have you checked the PTC Knowledge Base? Look under the Support Tools heading on: www.ptc.com/support/support.htm. Note: You need to be a maintenance paying customer to access this information.[/li] [li]Have you checked the resources listed in the FAQ PTC Pro/ENGINEER internet resources (faq554-468)?
[/li] [/ol]
If you cannot find the answer to your problem in these steps then go ahead and ask.
Please include which module (Modeling, Sheetmetal, BMX, MECHANICA, etc.) you are using, which version of Pro/ENGINEER you are using and what platform you are running on.
