Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I see what my hardware and drivers being used are?

General Solidworks How to's

How do I see what my hardware and drivers being used are?

by SBaugh Posted Sep 3, 2004 (Edited Oct 26, 2005)

1) Start\Run
2) Type "dxdiag"
3) Click "OK"
4) If it askes you to go through your hardware etc... Answer "Yes"
5) You can click on the display tab and it will list your video card and the drivers being used.

See below for Example

[img http://www.scottjbaugh.com/dxdiag.jpg]

The other way is through SW RX which was a new feature added in SW05.

Default Location is - Start\Programs\Solidworks [version]\Solidworks Tools\Solidworks RX

See image below:

[IMG http://img481.imageshack.us/img481/3516/SW_RX.jpg]

Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back

Top Bottom