Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rotating around a vertex, edge, or face

Part Environment

Rotating around a vertex, edge, or face

by  SBaugh  Posted    (Edited  )

Rotating around a vertex, edge, or face​
Contributed by SWscience

You can do this without using rotate command if your mouse have 3 button.

1) Hold down the 3rd button
2) Then double click on a vertex or edge you want to rotate around it.
3) Now you can rotate the model while 3rd button is hold.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom