Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Catia Macro for annotation

SCIRPTS AND MACROS

Catia Macro for annotation

by  Ratish Nair  Posted    (Edited  )
I have a part file in Catia with a geoset. as example in that geoset I have 5 linked points which are labelled as A,B,C,D,E . I want to create a macro which can look at geoset & go through each point & measure it to give XYZ values & add leader with Text in part file in 3d
A
X=
Y=
Z=
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom