Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I bring PRO-E generated .ct file into CATIA?

Pro-E to CATIAv4

How do I bring PRO-E generated .ct file into CATIA?

by  ts92281  Posted    (Edited  )
Run the following shell script for AIX:

progeo_to_cat4

Find out more about it by going to:

http://www.pro-classifieds.com/portal/forum/msgDetail.asp?msg_id=225&for_id=29
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom