Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Casting Simulation Software

Simulation Software

Casting Simulation Software

by  mloew  Posted    (Edited  )
[li]FLOW-3D« (www.flow3d.com)[/li][li]CAPCAST«(www.ekkinc.com)[/li][li]PAM-CASTÖ/SIMULOR« (www.esi-group.com/Products/Casting/)[/li][li]MAGMASOFT« (www.magmasoft.com)[/li][li]MAVIS 2000 (www.alphacast-software.co.uk/index4.htm)[/li][li]NovaCast (www.novacast.se)[/li]

Simulations of castings have been discussed in the following threads:[li]101 of casting simulations (thread727-83102)[/li][li]Aluminum Casting Simulation Software (Thread330-66671)[/li]
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top Bottom