Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in

Finite Element Analysis (FEA) engineering

tvirkler1
  • Question
Srand7: Global Stiffness Matrix is Singular - Frame with Semi-rigid connections
Replies
7
Views
24
IDS
IDS
jmex
  • Question
Reaction force to a flat and curved surface study 2
Replies
9
Views
16
rb1957
rb1957
AACING
  • Question
Methods to add rotation dof to solid with ABAQUS, MSC NASTRAN and SAMCEF
Replies
2
Views
16
SWComposites
SWComposites
AACING
  • Question
MSC NASTRAN View factor calculation
Replies
0
Views
12
AACING
AACING
WayneKagawa
  • Question
Best strategy for verification of tangent for hyperelastic material
Replies
0
Views
11
WayneKagawa
WayneKagawa
BeBtrEngeer
  • Question
What maks us want to do fatigue analysis? 1
Replies
13
Views
25
Roman.S
Roman.S
JoeCK
  • Locked
  • Question
Slab to beam connection
Replies
0
Views
8
JoeCK
JoeCK
wacee
  • Locked
  • Question
Hot spot stress at welds
Replies
0
Views
9
wacee
wacee
oharag11
  • Locked
  • Question
Modeling/simulating thermal vias - PCB/Electonic thermal analysis?
Replies
0
Views
12
oharag11
oharag11
Su5hi
  • Locked
  • Question
Why is Guyan reduced Stiffness matrix zero?
Replies
7
Views
12
Su5hi
Su5hi
mohamed hassan 2014
  • Locked
  • Question
Nonlinear analysis using HyperMesh with OptiStruct
Replies
0
Views
8
mohamed hassan 2014
mohamed hassan 2014
aaronsmith0402
  • Locked
  • Question
Von Mises beyond Yield, is it valid for Ultimate loading - Part 3
Replies
7
Views
10
rb1957
rb1957
EKCP
  • Locked
  • Question
Does anyone have experience with smaller PC builders like Xi computer or Velocity Micro?
Replies
1
Views
13
geesaman.d
geesaman.d
raslraslov
  • Locked
  • Question
Setting up units in nCode when importing d3plot (ANSYS)
Replies
0
Views
12
raslraslov
raslraslov
raslraslov
  • Locked
  • Question
nCode Designlife Materials and LS-Dyna d3plot (ANSYS)
Replies
0
Views
10
raslraslov
raslraslov
Burner2k
  • Locked
  • Question
MSC Patran Composite Question & a Vibration Analysis Question
Replies
14
Views
15
rb1957
rb1957
Kamyar_K
  • Locked
  • Question
Changing the slip interface by loading rate
Replies
0
Views
8
Kamyar_K
Kamyar_K
assafwei
  • Locked
  • Question
Boundary condition on a burst pressure test
Replies
6
Views
15
tigny
tigny
hammads23
  • Locked
  • Question
Non linear pot ptfe bearing
Replies
0
Views
12
hammads23
hammads23
hwa0725
  • Locked
  • Question
ABAQUS: Model not converging after turning on NLGEOM (Even with very small steps)
Replies
10
Views
11
IceBreakerSours
IceBreakerSours
You must log in or register to post here.
Back
Top