Thank you for your response,
yes it stops for 3 seconds and for 5 seconds in the different positions.
I will try the counter weight method.
Thank you very much.
Dear eng-tips members,
I’m planning to use RC servo Motor Model No. FT5325M or FT5835M
And the application is a durability test rig for a new product.
The operation of the servo is designed to work as follows:
1. The axe of motor is hooked up with a 3 RFID cards wheel with weight of 42 Grams...
@JayMaechtlen:
Thank you for your valuable feedback.
I'm Happy to know that my assumption is doable.
but i think i'm going to need a variable (Z) laser machine, in order to maintain the head close to the workpiece square holes as well as the center hole (two levels).
and this type of...
@ hendersdc:
Thank you for your support.
sorry the thickness is 2 mm. (my bad)
my target cost is to reach 1.6 USD Per Piece.
yes you are right the lase guy told me it will cost tribble the target cost if i cut 1000 piece in one time.
also he advised to make the laser holes first then...
@ dvd:
Thank you for your reply.
it's a client request to have 1000 piece per month but nothing is written yet.
also, tolerances can be +- 0.1 mm. after checking with the part mating and application.
Dear Dvd,
Thank you for your reply, the outer diameter is 220 mm. inner diameter is 170mm.
General tolerance is +-0.05mm.
I'm planning to produce 1000 part per month.
Thank you for sharing this valuable supplier, I will contact him but I think the cost plus shipping will be over budget.
I'm in...
Hello friends,
can you help me reduce the die cost of the part (3mm alloy steel):
the die workshop gave me a quotation of a four stages die:
1- forming the (plate like shape).
2- cutting center radius.
3- cutting half of the (small size cuts) on edge.
4-cutting other half (the rest of them)...
Hello Dear Eng Tips Engineers,
Can any body identify the attached components name and identity?
https://files.engineering.com/getfile.aspx?folder=81968803-990f-4b11-953e-781c1faf653e&file=Sun_Jan_20_11-57-51.jpg...
