Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by AeoN909

  1. AeoN909

    Expanding Photopolymer

    Gkan, Did you had any luck with the experiment?
  2. AeoN909

    methods for quantifying surface texture of honeycomb-cored sandwich panels?

    If you want a solid number you can use a diffracto. (is a bit old but it works) Problem with surface quality is that it is always subjective. The computer can say it is good but when you take a look it's bad. To get rid of the subjectiveness, we have a couple of tl lights fixed on the wall...
  3. AeoN909

    Lexan melting and using in silicone putty based molds

    Hi little late but nevertheless. If it was me i would use some simple gypsum to cast a mold of the finger. Take the mold en fill it up with a 2k epoxy, unsaturted polyeser, polyurethane or other casting resin. Let the material cure and then you have a perfect finger on which you can make de...
  4. AeoN909

    Fumed silica for reinforcing paint?

    CNT's will increase the viscosity extremely with the addition of only a few percent. Depending a bit on what kind of durabilty you want can can add a small particel filler with a high hardness on the mohs scale, this will give you a smooth coating or just add some silica carbide which has a...
  5. AeoN909

    Lexan melting and using in silicone putty based molds

    Why dont you use a 2k epoxy or up resin? there liquid at room temperature. You just mix in the b komponent, pour it out an let it cure. If you use a silicone mould probably dont need any release agent.
  6. AeoN909

    Reasonably cheap 220¦C resin system needed.

    Hi, Little late but maby you can use it. http://www.reinforcedplastics.com/view/30598/dsm-launches-resin-for-high-speed-pultrusion/ resin with a tg of 220ºC. regards.

Part and Inventory Search