dvd - I noticed in that previous document you sent, that could be an issue and they actually machine a raised journal on the shaft where the locking device sits to reduce these stress concentrations. Thank you for that information.
BEMPE16524 - Yes, there will be drum bearings attached to the end plates on the drum and pillow block bearings attached to the frame for the drum shaft to spin on. The drum is going to be chain driven by chain and sprockets connected to a planetary gearbox. Purpose of the winch is to pull...
desertfox - sorry about that. Attached is a picture of the excel spreadsheet I put together to calculate this. Let me know your thougths.https://files.engineering.com/getfile.aspx?folder=9fb43324-8e6e-48a6-9ba8-ab70ae8bca3e&file=shaft_design.png
Looking for some help on sizing the shaft diameter for a winch drum. I've worked the equation attached from Shigley and Mischke Mech Eng Design, but the shaft size seems pretty large for the application.
Anybody have any experience designing drive shafts for winches and/or know other...
Snickster - Thank you for working this out for me and excuse my sluggish mathematic skills. This has been super helpful. Also thank you for the online calculator link.
Pierreick - Thank you for the document giving examples and solutions, this too is very helpful.
LittleInch - Interesting, so the length of the pipe doesn't change the velocity whether its 1m or 20m?
Here is what I came up with on various pressures and flowrates for velocities. Does this look correct to you? Seems a little high to me...
Latexman - that would leave me with too many unknowns, wouldn't it?
LittleInch - That is so helpful, thank you so much for this. One question, if when finding the volume of length of pipe, instead of using 1m length I used 24.384 m (80ft) would that give me the velocity in the full length of...
All - Great replies, thank you kindly for all of the input, helps greatly.
pierreick - I like the online calculator, although I'm not sure how its getting velocity without a flowrate?
Snickster - great information, thank you. I'll rearrange this equation to solve for Vel.
LittleInch - Are...
Hello,
Is there a quick version or rule of thumb version of calculating gas velocities in a gas well flow back line? There are so many variable, that if changed slightly can really change all of the calculations.
Just curious if someone has a quick and dirty calculation to get approximate...
1503-44 - Fantastic paper, thank you for sharing.
Was working down through the equations and was curious when finding Vgmax is it safe to say the gas and liquid densities are their Specific Gravities?
Also when solving for Dmin what units are qa - gas flow in?
Thanks again for the...
Hello,
Does anybody have any experience with sizing sand separators (a.k.a. Sand Knockouts or desanders) and what calculations are needed?
Assuming a well flowing back at 10,000 psi, 100 deg F, 75 MMSCFD, 7 lbs/hr sand. These are arbitrary numbers, just trying to get an idea of what we need.
DVD - thank you. No sir unfortunately it’s myself and one other engineer that is on a project for another industry. I’ve worked in companies with many engineers on a team and am fortunate to still have a lot of them for reference. Unfortunately that was in a totally different industry from what...
