Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by AmbEng17

  1. AmbEng17

    MAWP IN LEGS SUPPORTS

    Can anybody tell me why compress calculate MAWP for legs support although it non-pressure retaining part ?
  2. AmbEng17

    body flange is being counted as a line of support for external pressure

    Hello I put body flanges between top head and shell . In compress , this message shows to me: " body flange is being counted as a line of support for external pressure " Anybody explain to me this and how I fix it ? Thanks ?
  3. AmbEng17

    Head flanged joint with shell

    Hello I have one shell ( seamless pipe ) with two dished end. The top head has to be joint with shell with #150 WNRF Flange . The thing is in compress If I use ASME B16.5 Flange I cannot put Two flanges bolted together in top. I can put only one . I can do this only If I use Appendix 2...
  4. AmbEng17

    Head will flanged joint in compress

    I have one vessel with seamless pipe and pipe cap head . The vessel has inside demister so client has requested that top head to be provided with flanged joint . How I do this in compress ?
  5. AmbEng17

    WRC 297 Analysis If MAWP limited by flange

    TGs4 What If it fails because of the flange
  6. AmbEng17

    WRC 297 Analysis If MAWP limited by flange

    Hello I am fresher for pressure vessel design . If MAWP is limited by flange ( class#150 ) and client has no issue with that since they do not want to change it to 300# , can I do wrc analysis 297 in this case to verify shell thickness ( If MAWP is limited by flange ) ???
See more

Part and Inventory Search

Back
Top Bottom