Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Ash7633

  1. Ash7633

    shear strength of HS bolts

    Hi dik, you mean I compaire the 31 kN to 92.6 kN shear capacity for category /s and with 92.6 kN for TB bolts as bearing mode. Is this right? Thanks Ashely
  2. Ash7633

    shear strength of HS bolts

    Hi dik, Thank you for your answer, as far as I remember from uni I was told that highstrength bolts do not have max. spacing reqruitement only min.
  3. Ash7633

    shear strength of HS bolts

    Hi Lomarandil, Thank you for your reply. that's correct. Please, see attached image. my concern is is there a possibility that the behaviour of the load pose more shear force on one of the bolts than the other. like for example the top one may carry extra shear than the bottom or worest take...
  4. Ash7633

    shear strength of HS bolts

    Hi everyone, I need to carry an ultimate load of 31 kN on 2M20 - 8.8 bolts. the bolts are vertically inline and the load is eccentric to the centre line by 400 mm. this results in 31 kN shear force vertical and mt=13 kN.m the question is if I hang the load on the two bolts will the shear...
See more

Part and Inventory Search

Back
Top Bottom