Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Beginner - Inspector

  1. Beginner - Inspector

    NACE Corrosion Engineers Reference Guide 4th Edition

    Does anyone have this book mentioned below NACE Corrosion Engineer’s Reference Book, 4th Edition – January 1, 2016 by Robert Baboian (Author) Language ‏ : ‎ English ISBN-10 ‏ : ‎ 1575903210 ISBN-13 ‏ : ‎ 978-1575903217
  2. Beginner - Inspector

    Density Calculation from specific gravity

    244 C is Another case . my intension is not confuse you. please
  3. Beginner - Inspector

    Density Calculation from specific gravity

    If my liquid sg=0.766 at 244 degree C & pressure = 8.63kg/cm2, what will be density of water i am suppose to consider. It will be vapour at 244 C
  4. Beginner - Inspector

    Density Calculation from specific gravity

    If my liquid sg=0.766 at 244 degree C & pressure = 8.63kg/cm2, what will be density of water i am suppose to consider
  5. Beginner - Inspector

    Density Calculation from specific gravity

    If my liquid sg=0.766 at 244 degree C & pressure = 8.63kg/cm2, what will be its density(liquid) ? whether I have to multiply it by 1000kg/m3 xSG ? i.e 0.766 x 1000kg/cm3 = 766 kg/m3=density of fluid
  6. Beginner - Inspector

    Density Calculation from specific gravity

    If my liquid sg=0.766 at 244 degree C & pressure = 8.63kg/cm2, what will be its density(liquid) ?
  7. Beginner - Inspector

    Density Calculation from specific gravity

    I want to calculate the density of crude and Kero Product , the Specific gravity is given at T & P, whether I have to multiply it with 1000kg /m3 (density of water @4 degree Celcius) or I have to find the density of water at that particular temperature and pressure and then multiply with SG...
  8. Beginner - Inspector

    Multiple gaskets in a Flange

    Greetings Please advise whether two gaskets can be installed in a flat face flange to arrest leakage in the instrument air line. The flange dimension is 2 inch 150# Flat Face. Does any engineering practice or reference advise that multiple gaskets can be installed in a Flange joint?
  9. Beginner - Inspector

    Change of Filler Wire

    Please kindly advise me whether a requalification of PQR is required when changing from ER-70S2 TO ER-70S6. Since I have a WPS qualified with ER-70S2+E7018. However, due to the non-availability of ER-70S2 can I use ER-70S6 without qualifying for new PQR.
  10. Beginner - Inspector

    EEMUA 234 90/10 CU NI ASTM 466 UNS 70610 Vs UNS 7060X

    Greetings Please kindly advise whether EEMUA 234 90/10 CU NI ASTM 466 UNS 70610 and UNS 7060X are the same ? what are the suitable filler materials required for welding ?
  11. Beginner - Inspector

    What thickness need to be mentioned in reports for branch connection with sockolet

    1.Please kindly advise what is the difference between boss and Sockolet ? 2.When I have a Run Pipe 18 " - 12.7mm Thick and Branch opening with 18x1.5" CL.3000 sockolet. Now please advise me what thickness need to be mentioned in the Report either pipe wall thickness of Sockolet wall thickness...
  12. Beginner - Inspector

    Dimensions(Thickness) of Sockolet

    1.Please kindly advise what is the difference between boss and Sockolet ? 2.When I have a Run Pipe 18 " - 12.7mm Thick and Branch opening with 18x1.5" CL.3000 sockolet. Now please advise me what thickness need to be mentioned in the Report either pipe wall thickness of Sockolet wall thickness...
  13. Beginner - Inspector

    FIT UP REPORTS

    Greetings Experts , I have two dissimilar components (Pipe 18" sch xs (12.7mm W.T) and elbow/flange 18" sch STD (9.57mm W.T), Now in the Fitup Report it have been mentioned 9.57 mm in the thickness section, since vendor claims that the Pipe ID have been grinded. Please advise me what thickness...
  14. Beginner - Inspector

    Welder Qualification

    Please kindly advise when a Welder is Qualified as per Sec ix whether he is also qualified as per AWS D1.1 ?
  15. Beginner - Inspector

    Welder Qualification for Structural

    Please kindly advise when a Welder is Qualified as per Sec ix whether he is also qualified as per AWS D1.1 ?

Part and Inventory Search