Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Beth22

  1. Beth22

    Hardfacing overlay of AISI 4130

    metengr, but our client requires us to use Stellite 6 without a butter layer. Actually we already have a newly qualified WPS also hardfacing using stellite but different base material (A36 and A487) and this is the last WPS we need to qualify but I am a little bit stuck up on what else I can do...
  2. Beth22

    Hardfacing overlay of AISI 4130

    HAZ hardness: 293HV, 344HV and 438HV WM hardness: 311HV - 432HV Base metal hardness: 188HV - 210HV
  3. Beth22

    Hardfacing overlay of AISI 4130

    Hi, I am creating a new WPS for hardfacing overlay of AISI 4130 Q&T using the parameters below: Base metal Tensile: 655 MPa; Hardness: 235 HBW Filler: Stellite 6 (SFA-5.21; ERCoCr-A) Process: GTAW Preheat temp: 225ºC Current: 90-94 A Voltage: 10-13 V Travel Speed: 50-90 mm/min Heat Input: 0.921...
See more

Part and Inventory Search

Back
Top Bottom