Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

carlosbenjamin's latest activity

  • carlosbenjamin
    carlosbenjamin replied to the thread PD Blowers in Series?.
    Stacking PD blowers in series for 30 psig is tricky but doable with the right setup. You’re right about needing an intercooler and...
  • carlosbenjamin
    carlosbenjamin replied to the thread Pipe inlet design.
    The loop in the thermal fluid pipeline is probably there to allow for thermal expansion, prevent stress on the pipes, or ensure even...
  • carlosbenjamin
    carlosbenjamin reacted to Thuba's post in the thread Pipe inlet design with Like Like.
    Goodday. l have a vessel heating edible oil using thermic fluid through a heating coil. The inlet of the thermal fluid the pipeline is...
  • carlosbenjamin
    carlosbenjamin replied to the thread Wet Pond Modeling.
    You’ll want to model it in stages—first, set the permanent pool as a storage node with a defined elevation. Then, create a weir or...
Show older items

Part and Inventory Search

Back
Top Bottom