Dhlo12's latest activity

copy that, many thanks

You need to control your application so that you do not have gaps or air bubbles. Creeping on the over plate can be removed with a grinder.

But wouldn’t that be better that leaving a gap or air bubbles ? Or would that create creeping on the overplate?

if shrinkage is experienced, would you try replying/reinjecting an additional layer?

Steel is one of the easier materials to bond with epoxy. The key is surface prep. Treat it as if you're applying any other durable coating.

We ended up going with Fosroc Lv injection, I am no quite confident with it

There may be problems with 'creep'. I recall the 'Big Dig' failure used a fast setting epoxy that had creep issues.

That is quite a large gap and many epoxies will generate a fairly high exothermic reaction at that thickness, resulting in either a...

Belzona has a plate bonding procedure that resembles this exactly. The product they use is 5811. They did a video about it on their...

Hey Guys, any recommendation of what epoxy product will be best to use for filling up a gab in between steel plates (12-15mm thick...

What to do? - a structural disrepair identified. The supporting beam of the station building is resting on several brick layers, which...

Probably do not design a reinforced concrete structure if asking on a forum "what reinforcing details need to change"? Surely, you...

This is not the right forum for your question. Now don't be so lazy; take the time to find an appropriate forum here for your question...

Well, I think the general structural forum could be the right forum. Though, I also don't think we have enough information to respond...

I've done multi-storey apartments with precast walls and HC slabs...