There is a function that maps(or converts) points(in double array format) from one coordinate system to another. Search MapPoint in the soulution center and you should be able to find a sample...
Manually, when I take the following steps:
Open Nx, new part, modeling.
Execute create block command
With the create block command open, I execute a measure distance
Hit cancel on measure distance, it takes you back to create block command
If I was able to capture the functionality that...
Is there any way to incorporate a Nx Open .dll within mold wizard? Ideally, to create a new button that would allow program execution without exiting mold wizard?
If not, is there a way to execute a Nx Open .dll within another NX window/command that would return to the Nx window/command without...
What is the best method of reducing the number of knot points in a curve?
Currently, we stroll along the curve and visually look for high density areas. We then split the curve around that area, delete the high density area, and bridge the curve back together.
DHuskic
Nx9.0
I am using the Face selection intent to select all the edges of the face highlighted below:
If I do a regular extrude normal to the face, and without any offset, here is the result.2. No offset example.png
When I start putting in a negative single sided offset, the offset causes the edges...
Hello,
I am attempting to create an extrude with single-sided offset but it is collapsing the face sometimes and only building one of the collapsed regions. Is there any way to force it to build all of the regions or switch which region it builds every time? See attached image for sample
NX...
We import the components into assemblies via Mold Wizard, and our designers move these components occasionally. We need the translation values for our dimensions that get imported as well.
DHuskic
Nx9.0
Is there a way to set an expression equal to a component's translation? The information I want connected to the expression would be under Component Properties -> Information. This opens a listing window and under Component Translations, the output looks like something below. I want to create 3...
Does anyone know if the Hide/Shade/Wireframe functionality, that a user can typically access after studying an interference and right clicking on the interference, can be somehow accessed without studying any interference's? It would save us a tremendous amount of time we currently have to wait...
In case anyone is interested, attached is a zip file containing a piece part and some images for my executions. Here are the steps to reproduce my error:
To reproduce the steps:
1. Open Nx
2. Open Clearance Analysis Parts.prt without partial loading or lightweight representations
3. Go into...
I reran the clearance analysis on a subset of parts, but only to isolate some of the ones that were causing issues. This time around, the same component pairs that we giving me New(Hard) interferences before, are now touching as they should be.
DHuskic
Nx8.5 & Nx9.0
Cowski, I am using the same version as you.
Bigwizz, that is what I am seeing on some components. Others will have a larger penetration depth, but it will be measured as some skewed angle. I'm using the same test as well.
DHuskic
Nx8.5 & Nx9.0
Everything is fully loaded and the analysis is set to exact. These False Hard Interferences seem to be New(Touching) interferences but for some reason the analysis labels them otherwise.
Problem is when there's upwards of 150-200 Hard interferences, a majority of them appear to be a Touching...
I'm a little riddled at some of the hard interferences I am receiving as a part of my Clearance Analysis testing. I am testing an assembly that should be a real life representation of our components once they are assembled. I keep getting false hard interferences that have no penetrating...
