Recent content by Dynocon

Or would additional cross ties?

The bottom horizontal board is a 2x6, the initial thought was to install a support from it to the ridge board at each rafter.

Did these photos help?

do these photos help?

Looking back other side. http://files.engineering.com/getfile.aspx?folder=bf6570a0-cd2c-48ee-9716-75f6f8a55655&file=IMG_20170221_185607.jpg

Looking backwards http://files.engineering.com/getfile.aspx?folder=db93a7bd-c122-48e5-a367-5a3a6c4c5023&file=IMG_20170221_185603.jpg

2x4 pushing up sheeting http://files.engineering.com/getfile.aspx?folder=b3d4dac6-3a90-48e8-ba72-623dc5f770f1&file=IMG_20170221_185129.jpg

Bottom of 2x4 on top of wall. http://files.engineering.com/getfile.aspx?folder=e46f4816-8211-4a95-92bd-c099679400df&file=IMG_20170221_185112.jpg

Looking right. http://files.engineering.com/getfile.aspx?folder=d6af81fa-22a9-4d3a-b369-5cc52ff554f9&file=IMG_20170221_185005.jpg

Looking left. http://files.engineering.com/getfile.aspx?folder=004f0065-de4a-4b7e-8dce-49e3710abb71&file=IMG_20170221_185000.jpg

This standing a near the end of the ridge board looking toward the 2x4http://files.engineering.com/getfile.aspx?folder=a452ef48-2d7c-474d-b201-6a0a38bb4f32&file=IMG_20170221_184939.jpg

I will take some photos and upload.

Let me know what info you need.

Looking at a brick ranch built in the 70's, the roof is hip with a ridge board, house is L shape configuration.So 2 ridge boards and each board has a 2x4 a couple feet from the end, nailed to the side of the ridge board and toe nailed into the top of the wall or ceiling joist. These 2x4's have...