Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Flosep

  1. Flosep

    Compressed Air. How do I measure Compressed Air Volume Flow?

    Hi Gmax 137 Do you know who the Hire company was or what was the brand name of the instrument. (Im in Australia) Many Thanks & Kind Regards Flosep
  2. Flosep

    Compressed Air. How do I measure Compressed Air Volume Flow?

    Hi Mining Man, It is a Screw Compressor. The Bit is about 200mm Dia. (Im not on site at present). The Geology is shale in an open cut coal mine. I have also attached 2 photos. Hope you can help. Many Thanks & Kind Regards Flosep...
  3. Flosep

    Compressed Air. How do I measure Compressed Air Volume Flow?

    Hi BigInch, Yes, the 1200 & 2000 is the standard cfm the compressors deliver. I have a table & it shows that at 120 psi through a 1" Dia hole, can/should deliver 1951 cfm, so that is close enough. The problem is,that the tips are over heating & the dust is not effeciently discharging from the...
  4. Flosep

    Compressed Air. How do I measure Compressed Air Volume Flow?

    Hi All, Iam hoping someone can help me please. I need to measure the compressed air volume on 2 Blast Hole Drills. One machine is 1200 cfm & the second machine is 2000 cfm. This is the compressed air the is delivered down the drilling rod. The compressed air is for (1) cooling the cutting tip...
See more

Part and Inventory Search

Back
Top Bottom