Gyco's latest activity

in the sense that the section CB is a regulation tie rod therefore subject to two equal and opposite forces applied to the ends plus we...

The loads on hinges C and B to be determined are written in the text.

the text says that B is a tie rod and you have to calculate the loads on C and B, interpreting that on CB there is a horizontal force...

my doubt is that since the tie rod CB is a regulation one, only a horizontal force acts, therefore in B since it is a hinge there is the...

the only thing that doesn't make sense to me is the binding reaction in B since there is a hinge and since it is a regulation tie rod...

Thank you very much for the solution.

thank you so much for your patience, i will try to do it again.

In conclusion, what are the reactions in A,B,C and D and the Force F worth?

Do the loads on hinges B and C not exert constraint reactions?

Thank you very much for your support but I wanted to ask you if my setting is correct or not.

I thought of solving it this way but I have 4 unknowns in 3 equations that cannot be solved.The problem is to find F which is unknown.

In the above solution the CB section with the constraint reactions is missing and then I thought that by exploding the structure the...

Unfortunately there is nothing similar online and I find it very difficult to solve this exercise.

so what would the free scheme with the forces be? In the text it says to calculate the loads on the hinges A,B,C and on the pin D

The loads on hinges B and C are missing