Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by ichbinpulkit

  1. ichbinpulkit

    driveline_active in adams car template ?

    First Question: Do you have a driveline in your template? If yes, you can directly give it mount communicators and use it, you are not forced to use the driveline active/unactive switch. If you need a switch, you need to create it using Group. Checkout the Group in the double_wishbone Template...
  2. ichbinpulkit

    Is it possible to make gravity as function of time on a mechanism simulation?

    Something like: IF(Glider_Speed<10mps); G=9.8; Might work giving out a function on value of Gravity.
  3. ichbinpulkit

    Motion along a curve

    As per I can understand your need, you need to use a SPLINE! It's exactly a guide curve and could be based on any variable, for eg. TIME. Find SPLINE in ADAMS HELP. Viele Grüße Pulkit Sharma
  4. ichbinpulkit

    ADAMS CAR / Curve modification / Smoothning

    Yeah, i am on it.. Although, I guess it is because of my geometry. the Front suspension is connected with the body with just one point in the center of the chassis.. and that too is a rotary actuator. Viele Grüße Pulkit Sharma
  5. ichbinpulkit

    ADAMS CAR / Curve modification / Smoothning

    By Debugging, do you mean Solver --> Debugging (EPRINT)? I am unable to understand the output of that.. Also, I am currently trying to use PID to solve my problem.. It's definitely a big mess, but i am jumping into it..
  6. ichbinpulkit

    Exporting a function from one subsystem template and importing in to another subsystem template

    Solution: 1. Input the data in a state variable through function/subroutine. Use an Output communicator of type: 'solver variable' from Template 1. 2. Create an Input communicator of type: 'solver variable' in Template 2 the input this value again in a State Variable. Observe, there are two...
  7. ichbinpulkit

    Realtime data communication for actuator - ADAMS Car

    Solution: 1. Input the data in a state variable through function/subroutine. Use an Output communicator of type: 'solver variable' from Template 1. 2. Create an Input communicator of type: 'solver variable' in Template 2 the input this value again in a State Variable. Observe, there are two...
  8. ichbinpulkit

    ADAMS CAR Simple Traction Powertrain remodeling

    So, I have the solution and would like to share. The Single traction Motor was designed in a very old version of AVIEW/ACAR. The hidden thing are the Design Variable. Which you may either access through the 'Information' or the best way is to go to 'Tools' --> 'ADAMS View Interface', here you...
  9. ichbinpulkit

    ADAMS CAR / Curve modification / Smoothning

    Exactly, I did try low pass... But still I am confused. The low pass function is a part of "Controls Toolkit" I created a state variable, which inputs the lateral acceleration. But I am unable to use this variable for Low-Pass, because here the options are a little bit different, and I thick...
  10. ichbinpulkit

    ADAMS CAR / Curve modification / Smoothning

    Hi there, I have my lateral accelration plot, using the data [lateral acceleration] I am trying to actuate a rotory actuator. I am not able to achieve a smooth operation because my curve is not smooth. Moreover I want it to smoothly transition from 0G to the real time G acceleration. I tried...
  11. ichbinpulkit

    DEBUG/EPRINT in ADAMS CAR

    Could you elaborate it somewhat better and deeper? Why is it not there in the ACAR Help/Guidelines? Viele Grüße Pulkit Sharma
  12. ichbinpulkit

    Damper in ADAMS view

    @paraebbasta You need to look down the Adams Guidelines for "Conditional Constructs and Loops", there you would find the conditional statements. Then, as mentioned by @GregLocock make a function based on : if((Length>A)*(Length<B),D1-D2)+D2 Try to use it, take the help of GPT as well. If you...
  13. ichbinpulkit

    DEBUG/EPRINT in ADAMS CAR

    Hello @GregLocock, You once suggested me to go through the DEBUG/EPRINT. I did, Somehow I am unable to understand how to determine the problem. Should I understand something from the Jakobian Matrix or search the part through it's ADAMS ID and look for what could be wrong. In this case there is...
  14. ichbinpulkit

    ADAMS CAR Simple Traction Powertrain remodeling

    Simple question, from the powertrain_simple_traction in acar_concept: Why do we have an "*" after throttle_scale, throttle_P_gain and throttle_I_gain?(I guess MSC missed that..) Also, Based on this template I made a single wheel powertrain (traction). But here I see, I have(made) a variable...
  15. ichbinpulkit

    Realtime data communication for actuator - ADAMS Car

    Hi there, I have an actuator in Suspension template. I want to input it's motion as a function which is dependent on the velocity on the CG of the vehicle. The question rises, How can I output the velocity from one subsystem and input it into the another one? Also, I am trying to avoid the use...
See more

Part and Inventory Search

Back
Top