Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by JRay852

  1. JRay852

    Roof Peak Connection

    Thanks oldinspector, I have manufacturer's specification and have verified the member capacity for this use.
  2. JRay852

    Roof Peak Connection

    I have looked at putting a ridge board, with metal straps over the top of the joists and a face-mount joist hanger to laterally support the joist through its depth. As the joists are lapped, should it be considered to use a wide metal strap with half the nailing in each joist, assuming I can...
  3. JRay852

    Roof Peak Connection

    I am working on a project that was stopped by the building department mid-construction. The owner is building a barn supported by posts/beams and cargo containers, without permit. I've been tasked with retrofitting the construction with additional supports to allow for the removal of all bearing...
  4. JRay852

    Relocating an Existing Lattice Tower

    Thank you for your response! I appreciate your advice. The tower will not be deconstructed beyond removing the nuts on the anchor bolts. In fact, the tower has already been moved and is laying on its side at the site it is to be erected in the future. This is a rural area and the gun club was...
  5. JRay852

    Relocating an Existing Lattice Tower

    Hello! I have been tasked to design a new foundation for a 60ft lattice framework tower that will be moved from one property to another. The tower will be equipped with a platform and winch system to raise and lower a clay target thrower for 5-Stand competition at a local gun club. The tower...

Part and Inventory Search