Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by LaserDave

  1. LaserDave

    Hello , I am working with a prc

    Here is a sample pic from some 1/2 A514 that we cut all the time. A514 is even harder to cut than A36 Dcoil and this is with no clean up.http://files.engineering.com/getfile.aspx?folder=fbc461b1-0097-4fb2-b832-c2e56bfb247d&file=.500__A514.JPG
  2. LaserDave

    Hello , I am working with a prc

    To Racastil: I have 2 PRC's mounted on NTC systems. I also was a service tech with them for 7 years, so I do have some info on PRC's. Hybrid: 7.5 lens, 2mm nozzle, .060 mPa oxygen, +1.5mm focus, +1.5mm nozzle deflection, 2800 watts CW, 45 inches/min. Flying optic: 7.5 lens, 2mm nozzle...
See more

Part and Inventory Search

Back
Top Bottom