When I say flange I mean Jacobs flanges that are connected with clamps so there is a slight/small margin of error.
DVD. My company wont pay to get a laser scanning contractor in or fabricator so looks like im going to have to try my best and get centreline dimensions / levels .
Hi jgKRI...
Im interested in how people would tackle this problem / measure a tricky transition.
I have an outlet to a piece of equipment and the inlet to a piece of equipment downstream that need mating up with some duct / chute work.
The inlet is offset in all directions ie x,y,z.
Both the outlet and...
Thanks for all the replies guys. Sorry I didn't get any notifications anyone had replied.
Yes it is a mobile scissor lift rate for 500kg so the load should be no problem and the load is centered according to manufacturer reccomendations.
The width between castors in the right view is approx...
I am after some help on the design of a trolley. We are buying out a standard trolley which can hold up to 500kg. Weight of the trolley is 114. The load the trolley will be carrying is 410kg.
I have attached a picture below. As you can see the load is quite tall. We have worked out the Centre...
