Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Paotr

  1. Paotr

    NX modeling principal plane of an assembly too stretched

    Problem solved ! The culprit was a joint in a pack of 2 far from its twin in a sub sub assembly I found it by loading each sub-assembly one after the other and checking the extent of the three plans by doing "new sketch". As soon as the plans became huge I opened the sub-assembly in another...
  2. Paotr

    NX modeling principal plane of an assembly too stretched

    Thank you PhoeNX, I'm honored and a little impressed to see that it's the writer who answers! I tried the technique without success, I even repeated it on all the layers and nothing either.
  3. Paotr

    NX modeling principal plane of an assembly too stretched

    I dig a little and find this pdf useful. Still have my problem but maybe it will help other. https://phoenxplm.com.au/files/tips_tricks/TipsTricks_201510_WhereAreMyObjects.pdf a+
  4. Paotr

    NX modeling principal plane of an assembly too stretched

    Hello, I work with an assembly around 3m x 4m x 4m and i don't know why but when i hit "Fit view" it takes me so far away that the part becomes 1 pixel. I thought there was a small element of the assembly like a screw that wanders very far from the rest but after checking I don't think so...

Part and Inventory Search