Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Ravi Patel

  1. Ravi Patel

    Pipe impact testing after bending process

    Hello Everyone, During my work i came across one question. Pipe of 16Mo3 (DIN EN 10216-2, 2020) size DN 250 Sch. 40 (9.27 mm) Bend Radius = 1440 mm Bend Angle = 60 Deg. Which process shall be followed, hot forming or Cold forming..? should it be impact tested after bending ? This material is...
  2. Ravi Patel

    Pipe Impact testing after bending

    Hello Everyone, During my work i came across one question. Pipe of 16Mo3 (DIN EN 10216-2, 2020) size DN 250 Sch. 40 (9.27 mm) Bend Radius = 1440 mm Bend Angle = 60 Deg. Which process shall be followed, hot forming or Cold forming..? should it be impact tested after bending ? This material is...
See more

Part and Inventory Search

Back
Top Bottom