Hello all,
Is there any commercial software for design of pressure vessel and heat exchanger according to ASME SECTION 3 for nuclear application??
is there any code for design of storage tanks for nuclear application?
You can start by reading (1) companion guide to ASME (2) Book by Brownell & Younge (3) Book by Bednar (4) ASME PTB-4 (5)Book by Denis Moss (6) Code itself
@r6155 client has not ask for any specifics. As per code, is my nozzle neck exempted from impact test requirement??
@Cobra17 UG-20(f) exemption is not allowed.
@GD2 thank you for confirming. this seems bit counterintuitive though. Nozzle neck because of its own thickness is required to be...
I have following configuration of nozzle assembly:-
1) Shell
Material: SA 516 Gr 70 (Curve B)
Thk :- 10 mm
2) Nozzle Neck
Material : SA 106 GrB ( Curve B)
Thk :- 6 inch ,14.27mm thk
3) RF Pad
Material: SA 516 Gr 70 (Curve B)
Thk :- 10 mm
4) Flange
Material : SA 105 (Curve A)
Size :- 150...
@YuJie_PV
Since your nozzle neck is forged, shouldn't it be as per curve "C" {all materials listed in Notes 2(a) and 2(c) for Curve B if produced to fine grain practice and normalized, normalized and tempered, or liquid quenched and tempered as permitted in the material specification, and not...
@TGS4 Thank you for your response.
In code case 2901, Fm value table note b reads "The designer should consider reducing the allowable factor if the loading is primarily sustained in nature, and the bolted flange joint operates at a temperature where gasket creep/relaxation will be significant...
Hello,
I`m new to storage tank design and i have started reading API 650.
Can you please share name of any reference book or article for storage tank design based on API 650??
Is there any PTB/sample problem book for API 650?
Any help on where to start for better understanding of API 650...
Hello All,
As per KM-251 in DIV3 : "The Charpy V-notch impact values specified in KM-234.2 are established at upper shelf energy levels that are required for most high-strength, low-alloy steels. The designer does not need to provide any test information to use upper shelf correlations for...
thread794-439631
Hello!!
Im trying to find some older ASME PVP Proceeding online but unable to find any digital copy...
Pls suggest way.
I'm looking for 1995 & 1996 PVP Papers.
Also, is there any way to contact directly to members on this forum??
Hello @Ariba01123
We cater to Oil & Gas, pet-chem and fertilizer industry. As of Now, we do not have any specific Vessel to design but my organization is preparing for any upcoming equipment specifically in hydrogen service.
Hello @r6155, we are reading div3, but we wanted to understand more...
Hello All,
We are trying to prepare Design philosophy of High-pressure vessels ( > 700 bar) using ASME sec8 div 3 in my organization.
Please share any book, existing licensor or PMC specification for High pressure vessels Design for reference and guidance.
