Snickster's latest activity

I think I see what the quotation of the Original Poster is trying to say. I assume this is a direct quote from the source that he found...

I think that is a good arrangement for hot piping. The vertical down pipe will absorb thermal expansion difference between the hot and...

Yeah looking at the head loss tables for 6", 8" and 10" 5 ft/100 feet loss is about 10 ft/sec, 13 ft/sec and 14 ft/sec, which is kind of...

I think he means head loss per 100 feet of pipe like 5 ft per100 ft friction loss. That sounds about a reasonable friction loss...

Here is a very old Exxon spec for multiphase twin rotor PD pumps which has a little information on materials and other info that may be...

5% of what? What kind of water pipe systems you are talking about?

Here is another reference on corrosion in Oil and Gas Industry.

Looks like you just have H2S in the liquid phase in 18 PPM concentrations. NACE will give recommendations on materials for different...

I agree with LI. Don't eliminate anything but in each internship mention experience directly related to the job you are applying for...

The OP said there are two filters in series each at normal pressure drop of 0.5 kg/cm2 or 1.0 kg/cm2 and for two in series and total of...

I am not sure why you say you can't apply Bernoulli. All fluids is an application of the balance of energy terms which are found in the...

Stellite is a hard facing material plated onto an integral seat. An integral seat is a seat that is formed into the metal body of the...

I should have mentioned that yes the height does cancel. In my calculations I found Hd by taking pressure Hc and subtracting the...

I checked calculations for 4 cases attached. I assumed 4 inch ID pipe at 350 gpm just for setting up a reasonable example. Based on the...

I think your resume looks impressive for someone still in college. I would gear it more to the type of job you are applying for. I...