Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by structuresdesign13

  1. structuresdesign13

    Staad Column Design

    I have one story 3d frame. Total ht is 20ft. and want to add one beam at 11 ft level tin z-z direction to brace. then in staad do i have to define Ly and Lz for column for KL/r calculation or software will consider by itself. if yes then after adding one beam in z-z direction my Ly = 20 and lz =...
  2. structuresdesign13

    Wood flitch beam design

    Hello i am designing one flitch beam. i have one 4x10 sawn lumber and trying to put one channel on each side. does any body have any reference calculation for flitch beam.
  3. structuresdesign13

    Restrained basement Wall Design

    I am trying to design restrained concrete basement wall. i have 13 ft high wall. Soil weight is 125 pcf. Angle of internal friction is 28degree. I have to design this wall for Eq. fluid pres. @ 61 psf/ft. I can get moment based on triangular pressure and design the reinforcement. Now if i...
  4. structuresdesign13

    Anchor Bolt

    I am trying to design anchor bolt for biaxial bending. Anybody has that kind of calculation example ?
  5. structuresdesign13

    Double angle bolted connection

    Hi i am checking double angle shear connection. I have staggered bolt pattern. The beam is W 14x22. it has 4 in cope and depth of cope is 1.25 in. In Angle, the first bolt is located at 1.5 in (edge distance) from angle and in beam the bolt is at 3 in (edge distance) from angle. The angle...
See more

Part and Inventory Search

Back
Top Bottom