Hi Greg,
Sorry to bother you once again.
As you suggested, I was able to create a spline from the machine data but sometimes when you want to do a different motion test then you do not have the desired motion curve/data. Can you please explain how can I use function bulder to create such type of...
Hi Greg,
Thanks for the response.
In order to achieve the max velocity of 42 rad/sec in 0.36 seconds, I used this function before "Step5(time,0,0,0.36,42)", but the angular acceleration that I got from this case was 2 times the one that I calculated theoritically. I have never used motion...
Hi All,
I want to apply an S-curve motion profile to a pulley in ADAMS.The desired profile is attached here. The max velocity during the motion is 42 rad/sec and the time to reach the max is 0.36 seconda. If someone has any idea on how to generate it, please share it with me.
Thanks.
Hi guys.
I am modelling a synchronous belts systems (Linear Positioners) in ADAMS Machinery. An Illustration of the system is attached. I want the mass in the system to follow a certian motion profile which is represented in the figure attached. I am using Pulley Actuation Input to get the...
Hi.
I am modelling a trapezoidal toothed belt and pulley system for linear positioners and I need some help in the Actuation Input. I apply an Actuation motion to the system which accelerates the system and then comes to a stop at the end of the stroke. After the simulation, the value of the...
