Exporting Pipe Data From C2 into Plant3D

I have figured this out:

CAESAR II:
- Have piping model with any number of sections, rigids, etc.
- Be able to successfully run the model with your load cases.
- in the main menu, in the top ribbon select Generate Isometric Stress
- Perform what set up you may need, node naming, etc.
- Ribbon > Create Isometric Stress Drawing
- Check Use Default Style
- Uncheck Generate PDF (unless you need these, but these are irrelevant for this process)
- Ok (you may edit you PCF here, though I am unfamiliar with the format enough to be able to edit it)
- Close out of the next menu (again, unless you need these)

AutoCAD P3D:
- Must be in a project
- Must have a drawing open within said project
- Ribbon > Home > PCF to Pipe > select your PCF file and import.

If you get an error that the object ID is null, you don't have a project set up or the dwg is not in a project.

I haven't been able to open the log through the ACAD dialogue box, as it just crashes after doing so.

Still working through this but wanted to get it down before I forgot any of the process.