Search results for query: *

Hi, laser was running for 3 hours and I did power test. Current was: 67 and Power: 2469W. There were no lighting inside glass tubes. And flow was normal. Any suggestions what to do next? To check all mirrors in resonator? By the way I notice strange problem when we start resonator it...

Thanks, I will do that tomorrow. I have made vacum test today, it changes 1 milibar in 30 minutes.

Hi, how to do this power test? I know how to to set power on resonator to 100% (Local & Step)

Hello, Bystronic Bytube 3kw laser with 35000hours on it. We have strange problem, one part could be cut ideally and another one is not cut in all areas. It looks like laser doesn't have enough power or the power level is jumping drastically. You can see in our video that there is no sparks...

I was thinking about doing shot on plastic cube, but I don't know how to do it. Could you please explain it to me. Is it pulse shot on 100% power? How many milliseconds? Where do I place the cube?

How did you find out this problem?

I found solution to this problem, you need to turn this stacking on in Service menu - > Config cnc Bysort ankoppelung. Then in setup menu it appears as separate menu unit where I can disable it. As well in PLC unit new menu appears, where it must be disabled.

Hello, In our Bystronic MMC program setup, I'm missing one line: N42=Stacking: 0=off,1=on This line is switched to on at the moment and when I cut in automatic mode, when laser finishes one program, laser stops waiting for stacking operation. If I look in MMC setup or config hardware there...

How many hours on machine? Just thinking out loud. Is it possible that linear guides are wearied off at certain place? Maybe there is some other equipment or machinery running nearby which cause vibration? When you did beam alignment was it checked in all 4 corners? and beam circle is the same...

We charge 200-250EUR per hour for tube cutting. Bystronic Bytube 6504. https://www.youtube.com/watch?v=8WAnszPu1Ss&t=1s

BIOS battery was removed, so I guess that's how they disappear.

I have solved this problem with Krugtech help. Solution: You have to make sure IRQ 5, 10 and 11 are reserved in the bios. Possibly IRQ 6 also depending on what network card is being used.

Hi, there is company in Latvia which has 2 similar Bystronic machines(Dos version), I would recommend to speak with them. http://www.bacmetal.lv/Kontakt.aspx

I just want to share some Bystronic laser manuals, that I have. Package contains: 1. Operator's manual Bystar 2. Bytubework - THE TUBE PRODUCTION MODULE OF BYSOFT 3. Training manual Bysoft 6.x 4. Basic course Cutting technology 5. BYTUBE Operating instructions 6. Bystronic spare parts catalog...

I'm sending you Bystronic head drawings. Part No.6 is the ceramic that you need to check, new cost at Bystonic around 10EUR. Regarding head holders I have cut it myself with our laserhttp://files.engineering.com/getfile.aspx?folder=8608e5f5-1505-4a7f-9b09-2c8dbf18e582&file=cutting-head-drawings.zip

I have checked, there is no install folder on my Bystronic pc. Maybe you could share this driver? Thank you

Hey, what was your OS version, DOS or Windows 95/98? I have complete hdd clone of our Bystonic Bytube Machine(win95). And Software CNC96 P6112C.zip, Software MMC96 P6012.zip

We had the same problem 1. Check if there is a rubber spacers next to your head. See photo below. 2. Check if your laser head clamps, clamp head firmly. We have changed those. 3. Ceramics in laser head can be broken or with cracks. I suggest to change it to new. 4. Check if O2/N2 filters are...

Hello, our operator keyboard on laser doesn't work. If I pres buttons on virtual keyboard on screen, LED light light up, but if I press button on physical keyboard, it doesn't work. Mouse on the keyboard works normally, but as I see it's a separate device. Maybe drivers are missing? Or maybe I...