geotechguy1
Easy to immigrate but getting job is difficult is the point your saying?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
Hai,
SparWeb (Aerospace)
Thanks for your answer i am even ok to work as welder in fabrication work there in Canada if proper job and salary paid by them.
What is welding trade qualifications? Is it possible to explain me?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to...
Hai,
I am cleared this year International welding technologist from IIW, with diploma in mechanical engineering along with IWT is it possible to work in Canada? PE exams are mandatory in Canada for engineers i know but i can work in Supervisor category in Canada right? or I need Bachelor...
SSAW Pipe some may call DSAW pipe?
Thanks for all for sharing.
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
DVWE
Thanks for the information. So the DSAW pipe is meaning the two types LSAW PIPES and SSAW PIPES?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
Hai,
DSAW pipes mentioned in the API 5L standard is that two longitudinal weld seam must be at 180 deg?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
Hai,
While reviewing the MTR's for the ASTM A 53 Gr B / API 5L Gr B Pipes MTC the Carbon percent is mentioned upto 0.30 % is allowed by the standard specified limits, So this pipes are fall under MILD STEEL category or Low CARBON STEEL category?
Any standard is given clear detail about...
Hai
Mr.IRstuff,
The matter is not serious but when here the clients ask us where am working right now we providing the QMS to them is it right to do that instead of providing the QA manual?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
Hai,
The attached photo is one of the fitting which is hot formed ecc reducer, In the reducer pipe size forming marks (up and down) noticed in the inner surface is it allowed by any standard?
The size is DN 500 mm x DN 300 mm - SA 234 Gr WPB
Thickness - 9.53 mm
REGARDS,
G.SRIRAM...
Hai all,
Thanks for the valuable input,
So my understanding is QMS mother document from that our QA/QC manual will be written right?
Who will write the QMS & QA/QC manual?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
Hai,
Please any one give some details about how the QA manual is differs from QMS?
How to write the both documents with out having much knowledge in quality?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
XL83NL,
The plates were joined and made one half section of elbow like this two half section elbows joined by two longitudinally joints. My doubt is ASTM A 234 specifies fusion welds is allowing This joint is acceptable if manufacturer gives the joint is R.T found acceptable. or i have to prove...
IFRs
Two plates joined and welded to make the half portion of elbow. This ia allowed as per the ASTM A 234 WPB?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
Mr.XL83NL,
PED not applicable, the fitting will be fitted in the pipe for the CHILLED WATER DISTRIBUTION LINE (EN 253). The ASTM A 234 WPB is allowing welding construction but not mentioned this type of radial joints in the fittings.
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in...
Hai,
I have a fitting DN 1000 mm which is having cross long seam as what i understood picture attached here the weld joint is allowed in ASM A 234 WPB fittings the thickness is 12.7 mm.
If the fitting manufacturer gives R.T certification for that joint is it ok?
REGARDS,
G.SRIRAM...
Mr.KevinNZ,
SIF means SELF REINFORCED FITTINGS?
Thanks in advance.
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
Mr.LittleInch,
Tanks for your explanation. I have ASME B 31.1 code.
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
Mr.LittleInch,
My Tee's coming under reinforced extruded outlets means any externally welded any Reinforcment pad should be there? And the Size of the run to branch there is no restriction right? for example DIA 1600 mm X DIA 600 mm TEE can also be reinforced extruded outlet?
Can you pls...
