Search results for query: *

@racookpe1978 Its Horizontal

@LittleInch: Hi and sorry for delay.. I got what you said, well explained. And you are right abt "1 litre of water will weigh the same as 1.96 litres of propane." I have nailed it. I need to have water capacity for the safety distance. Safety distance is categorized on the basis of W/C. Thank...

@racookpe1978 This is Internal Diameter. This is perfect Hemisphere. At least some empirical formulas will also do. We know that 1 liter = 1.96 Kg of propane, hence using simple arithmetic converting the same in liters. Further comparing the same with Water. (But i am not sure if its correct)...

Hi LittleInch 1 MT = 1 Metric Ton Unit in Metric System. I want to check Water Capacity at 100% tank filled. Whereas i propane/LPG is going to be filled at 80-85%, but that is not the case i need to check for Water. Low level will be 20%. For Eg:- If tank is 50 MT and Radius is 1.85 meters...

Refer UG-27. Let me tell you, thickness does not depend on what fluid you are using, its solely depends on your Pressure, MOC and dimension. In case of UG-16(b), those fluids even if exposed to ambient will not have any ill effect, hence those are standard thickness provided by ASME. Please...

Hello Friends I have very basic simple question to ask. How much water capacity does 1 MT storage tank will have(considering dish end as hemispherical)ie. 1 MT storage tank will contain how much liters of water. In that case how much W/C in 50 MT ? Your kind help will be appreciated.

Hello friends and MJCronin, I am sorry for the delay. I really appreciate your answer for the same it has however increased my knowledge. The reason that it was failing because it was not sustaining on that thickness. hence 300# flange was failing and 150# was passing. That is all i can say...

@SnTMan .. The problem was it was passing on 150# flange but not for 300#

Hi Vessel Fred Sorry for the delay. To set the material on Impact Test on PV Elite, all you have to do is --> While selecting material there are 3 dots besides its selection. --> Go for "If normalized or quenched and tempered option" so that your material gets shift to curve D --> Check the...

Hello Friends, Thank you very much for all your replies. The problem got solved. I have increased the thickness considerably with approval and things are now fine. Thank you once again. @MJCronin SS --> Screen Shot BTW MJCronin, why in America do you take particularly 250 psi ? is there any...

According to Indian Standards it is imperative to select 300# Flange for Propane and LPG service. Kindly help me over.

Hello Friends, We are designing Propane Mounded Storage Tank for Water Capacity of 119,000 Liters. Here are the following details with the SS. Working Pressure - 12 kg/cm^2 (171 psi) Design Pressure - 21.356 kg/cm^2 (304 psi) Corrosion Allowance - 1.5 mm (Is it fair to have 1.5 mm (0.059") or...

Hello Folks I am new in this field and need some expert guidance regarding Mounded Bullets My queries are 1) Can we design Mounded Storage tank in PV Elite? 2) If yes, then what precaution one needs to take while designing the same? 3) What special precaution needs to be taken when its...