Hi,
I have a Piping material specification for a project. There is one piping material class (16") for the low temperature service but the same material is also used for the HP steam.The material is ASTM A333 Gr. 6.
Can somebody clarify how can we use the same material for low temp. service as...
Hi,
One of our Compressor vendor has recently conducted the Mechanical Run test on the Centrifugal Compressor. The vibration value recorded is slightly more than the limit stipulated in API (25microns).
Vendor has mentioned something about the Morton effect in the Compressors. I tried to find...
Hi,
The IOM has been requested by the Contractor several times, but of no vain. Vendor just informed that the IOM will be provided but at later stage.Siemens informed that this policy is not client based, there were some incidents where the installations were not as per the procedure which led...
That's rotw for the reply. We did normally received the IOM manual of other packages from vendors but we have not received the IOM manual from Siemens. They informed that they do not provide it intentionally so that Customer doe not try to install it by themselves without the presence of their...
Hi,
There will be GTG (55MW - Siemens) installation planned next month. Can you guys let me know the things / points to consider before the installation works begins. Although it will be supervised by the vendor representative but still want to make sure nothing important is missed.
Hi,
There will be GTG (55MW - Siemens) installation planned next month. Can you guys let me know the things / points to consider before the installation works begins. Although it will be supervised by the vendor representative but still want to make sure nothing important is missed.
