I have a #2 fuel piping system #150 where space between valves is limited. I need to create some room by removing a 6x4 conical reducer and I was thinking of installing a compact reducing flange in its place. I have used these before on instrumentation on top of tanks but never in the piping...
Thanks for the replies.
I’m looking at using the C series fixed cracking pressure check valve [10 psi] Swagelok check valve that will vent/relieve pressure back into a vented above ground storage tank. Max pressure in the tank based off fluid height would be 11 psig.
So I guess in a perfect...
I'm looking for a document or book to purchase that would help me design a cascading thermal relief system for pipes that contain a fluid that is block in by valves.
Thanks for any help,
Sorry for the delay in getting back to this. Turns out it is an air release system provided by Gorman-Rupp. Waiting for a call back on its operation and possible troubleshooting tips.
Thank you,http://files.engineering.com/getfile.aspx?folder=96ca1540-efb5-4dff-9a34-b3c66b085bdf&file=17314.pdf
Hello All,
I'm a controls guy so I could use some help on identifying the two level device located on the right size of the guard in the attached picture. I believe it to be an air release set-up but the truck drivers I'm told have always had to manually bleed the air from the pumps before being...
