Thanks allot for the respond people! :)
Good to hear that my calculations are correct. Of course there will be more factors that will determine the life span, like temperature, lubrication, environment etc. But the calculation give me a good "pin point".
I looked at the SKF brochure you...
Hello people
I have tried to calculate the life span of a bearing I want to use. Here is
the formula I used:
L10 Life = (Rating8)3 x 1,000,000 Hours
(LoadE)3 60 x n...
This pipe is horizontal.
The drive shaft of the 60s Pontiac looked very interesting, it would be of interest how the bearing are mounted in the tube. To mount/press ball bearings on the axle would not be a big problem. But it`s how to get it inside the tube, and make the O.D. of the bearing...
Tanks for the respond Mike!
I have been thinking on the loctite solution, that seems like a quite easy and cheap way to install the bearings in the tube. But there is one thing that might be a problem. When I have putted Loctite on the O.D. of the bearing (or bushing), and try to slide the...
Hello people!
In the last few days it has emerged a problem with my design regarding bearing solution. Take a look at the picture I have attached. I have a circular tube (I.D. 112mm and O.D. 120mm) that is 6 meters long. Inside this tube there is a axle, 35mm in diameter. My problem is how I...
