Hah- Kaydon't
This brand was discussed recently but it's way too expensive.
I'll see if I can upload a drawing later today (a pen on napkin kind of drawing, I can't disclose any official technical drawing, even if redacted).
This way you'll understand better the exact configuration and the...
I cannot talk about it in too much detail but we are talking about thin section angular contact bearing to be used in a cycloid reducer.
Knowing more about this "gap" or δa0 is important in order to then calculate the thickness of a couple of spacers.
This so that when the whole reducer is...
https://www.bearing.co.il/img/tech1/PDF/NSK_CAT_E1102m_A96-99.pdf
Take a look at the images in the 10.2.2 paragraph. Notice also how the bearings have a support in the corners where the force transmits itself.
A spacer would help with the preload,ut in your case it would need to be placed on...
I might be answerting myself here, but found this NSK guide: https://www.bearing.co.il/img/tech1/PDF/NSK_CAT_E1102m_A96-99.pdf
I'll leave the thread here for posterity.
Hello,
I've been thinking about the possible meaning of this image:
It says "Preload gap on inner rings" and since this could have different meanings I was hoping someone could help me clarify.
Does it mean:
- You need to leave a minimum gap between the bearings (using a spacer placed in...
