Hi iop95
Thank you.
We are waiting for the new motor because the actual doesn't have the Identification plate, this one was rebuilder and they don't have the correct data. Sorry.
We are goanna try with your recommendations, and in that moment I'll send you the p/n.
Hi TugboatEng,
Thank you.
We disabled all the Alarms and the 365 passed to FitCoastStop. But the Drive stop immediately without any alarm, the Drive try to start but immediately the Drive stop.
And in the Parameter 677 = 0.
We tested with a Lights structure in place of the motor, but we...
Hi TugboatEng, Thanks for your help.
I don’t have it connected to the PLC now. We are testing it just in manual before connect It to the PLC.
We had to enable all these Alarms because the drive was stopping immediately without any alarm. But not all the alarms can be set to ignore, for...
Hello.
We have a Powerflex 700s phase II firmware 4.002, but the encoder card is burned. We want to disable it to use the Drive without motion control. We try some configurations found it in the web, but the parameters mentioned are different of the parameters that we have in the Drive. When...
